Showing posts with label Egypt. Show all posts
Showing posts with label Egypt. Show all posts

Thursday, June 14, 2018

Luxor Temple Egypt

Luxor is often called the world’s greatest open-air museum, but that comes nowhere near describing this extraordinary place. Nothing in the world compares to the scale and grandeur of the monuments that have survived from ancient Thebes.
 
Luxor is a city on the east bank of the Nile River in southern Egypt. It's on the site of ancient Thebes, the pharaohs’ capital at the height of their power, during the 16th–11th centuries B.C. Today's city surrounds 2 huge, surviving ancient monuments: graceful Luxor Temple and Karnak Temple, a mile north. The royal tombs of the Valley of the Kings and the Valley of the Queens are on the river’s west bank.

Luxor Temple is a large Ancient Egyptian temple complex located on the east bank of the Nile River in the city today known as Luxor (ancient Thebes) and was constructed approximately 1400 BCE. In the Egyptian language it is known as ipet resyt, "the southern sanctuary".

In Luxor there are several great temples on the east and west banks. Four of the major mortuary temples visited by early travelers and tourists include the Temple of Seti I at Gurnah, the Temple of Hatshepsut at Deir el Bahri, the Temple of Ramesses II (a.k.a. Ramesseum), and the Temple of Ramesses III at Medinet Habu; and the two primary cults temples on the east bank are known as the Karnak and Luxor.

Unlike the other temples in Thebes, Luxor temple is not dedicated to a cult god or a deified version of the king in death. Instead Luxor temple is dedicated to the rejuvenation of kingship; it may have been where many of the kings of Egypt were crowned in reality or conceptually (as in the case of Alexander the Great who claimed he was crowned at Luxor but may never have traveled south of Memphis, near modern Cairo.)


To the rear of the temple are chapels built by Amenhotep III of the 18th Dynasty, and Alexander. Other parts of the temple were built by Tutankhamun and Ramesses II. During the Roman era, the temple and its surroundings were a legionary fortress and the home of the Roman government in the area.

The entrance to the temple itself is known as the first pylon. It was built by Ramesses II and was decorated with scenes of his military expeditions, in particular his triumph at the battle of Kadesh. The pylon towers originally supported four huge cedar flag masts from which banners would have fluttered in the breeze. Later pharaohs (most notably the Nubian kings of dynast twenty-five) added scenes recording their own military triumphs to the first pylon. This entrance was flanked by six massive statues of Ramesses, two seated and four standing, but unfortunately the two seated statues are still relatively intact.

There is also a twenty-five metre pink granite obelisk also built by Ramesses just inside the gateway. It is one of a pair - the other now stands in the Place de la Concorde in Paris. The four sacred baboons who greet the morning sun are carved on the pedestal and the names and epitaphs of Ramesses appear on each side of the obelisk.

Beyond the first pylon Ramesses II built a peristyle courtyard (replacing an earlier court thought to have been constructed by Amenhotep III) which was set at an angle to the rest of the temple in order to preserve three pre-existing barque shrines constructed by Hatshepsut (with later additions) which stand in the northwest corner. The court is composed of a colonnade including a number of colossal statues of Amenhotep III which were usurped by Ramesses II. The Abu'l Hagag mosque perches precariously at the top of the columns of this courtyard. As a result one of the doorways, on the eastern side, hovers uselessly above the ground.

The peristyle courtyard leads to the processional colonnade built by Amenhotep III with additional decorations added by Tutankhamen ,Horemheb and Seti I. By entrance to the colonnade there are two statues representing Tutankhamun, but on each his name has been replaced by that of Ramesses II.

 It is lined with fourteen huge papyrus topped columns and the walls are decorated with scenes depicting the stages of the Opet Festival. Other decorations celebrate the reinstatement of Amun and the other traditional gods following the Atenist heresy. They are ascribed to Tutankhamun, but his name has been erased and replaced by that of Horemheb

The inner sanctum is reached by a shadowy antechamber with eight columns which was used as a temple during the Roman period and Roman decorations overlay the original Egyptian carvings, but the original carvings can be seen in patches where the stucco is crumbling away. A second antechamber contains a further four columns and depictions of Amenhotep II offering incense to Amun.

Past the antechambers, there is a barque shrine built by Amenhotep III and rebuilt by Alexander the Great which would house the statue of Amun during the Opet festival. Finally there are private chambers for the use of the three gods and the Birth Shrine of Amenhotep III in which the divine origins of the king are proclaimed. Amun takes the place of his father, Tuthmosis IV, to father the god-king with Mutemwiya (Amenhotep's mother). Khnum makes the pharaoh on his potter's wheel and the newborn king is presented to the gods.

The temple of Luxor is first mentioned on a pair of stelae dated to the twenty-second year of the reign of Ahmose I found at the Maasara quarry, to the east of Memphis. The stelae record the excavation of limestone for a serious of temples including the Luxor temple, which is referred to as the "Mansion of Amun in the Southern Sanctuary." However, the earliest structure discovered at Luxor appears to date to the reign of Hatshepsut and Tuthmosis III. The shrine they constructed was later expanded and extensively remodelled by Ramesses II and the original construction.

This was not the last building at Luxor to be extensively remodelled or dismantled. Reused blocks from structures built by Hatshepsut, Thuthmosis III and Amenhotep II have been found at the site. Akhenaten built a sanctuary dedicated to the sun god next to the Luxor Temple but this building was destroyed by Horemheb.

Tutankhamun built extensively at Luxor, but his constructions were largely usurped by Horemheb and Ramesses II. At one time there was a chapel dedicated to Hathor (built during the 25th dynasty by Taharqa) and a colonnade built by Shabaka, but both have been destroyed. Hadrian built a small mudbrick shrine to Serapis but all that remains of this structure is a statue of Isis and some rubble.

The Romans built a fort at the site and it is thought that around 1,500 Romans were stationed at the site. Although it seems that the religious function of the site had largely been eclipsed by its military function and some blocks of masonry from the temple were used in the construction of military buildings, a few other Roman additions suggest that this process was not complete.

A Christian basilica was added to the north east corner of the temple and later a mosque dedicated to the Muslim saint Abu'l Hagag was constructed on top of the ruins of this Christian building.

Construction

The original two obelisks, as seen in 1832. The one on the right is now in Paris, known as the Luxor Obelisk.

Luxor temple was built with sandstone from the Gebel el-Silsila area, which is located in South-Western Egypt. This sandstone from the Gebel el-Silsila region is referred to as Nubian Sandstone.This sandstone was used for the construction for monuments in Upper Egypt as well as in the course of past and current restoration works.

Like other Egyptian structures a common technique used was symbolism, or illusionism. For example, to the Egyptian, a sanctuary shaped like an Anubis Jackal was really Anubis.

At the Luxor temple, the two obelisks (the smaller one closer to the west is now at the Place de la Concorde in Paris) flanking the entrance were not the same height, but they created the illusion that they were.

With the layout of the temple they appear to be of equal height, but using illusionism, it enhances the relative distances hence making them look the same size to the wall behind it. Symbolically, it is a visual and spatial effect to emphasize the heights and distance from the wall, enhancing the already existing pathway.

Excavation

From medieval times the Muslim population of Luxor had settled in and around the temple, at the southward end of the mount. Due to the Luxor’s past city population building on top of and around the Luxor temple, centuries of rubble had accumulated, to the point where there was an artificial hill some 14.5 to 15 metres (48- 50 ft) in height.

The Luxor Temple had begun to be excavated by Professor Gaston Maspero after 1884 after he had been given the order to commence operations.The excavations were carried out sporadically until 1960. Over time, accumulated rubbish of the ages had buried three quarters of the temple which contained the courts and colonnades which formed the nucleus of the Arab half of the Modern village.

Maspero had taken an interest earlier, and he had taken over the post of Mariette Pasha to complete the job in 1881. Not only was there rubbish, but there were also barracks, stores, houses, huts, pigeon towers, which needed to be removed in order to excavate the site. (There still exists a working mosque within the temple which was never removed.) Maspero received from the Egyptian minister of public works the authorization needed to obtain funds in order to negotiate compensation for the pieces of land covered by the houses and dependencies.

Festivals

It has been determined that the Luxor temple holds great significance to the Opet Festival. The Luxor Temple was dedicated to the Theban Triad of the cult of the Royal Ka, Amun, Mut, and Khonsu and was built during the New Kingdom, the focus of the annual Opet Festival, in which a cult statue of Amun was paraded down the Nile from nearby Karnak Temple (ipet-isut) to stay there for a while, with his consort Mut, in a celebration of fertility – hence its name.

However, other studies at the temple by the Epigraphic Survey team present a completely new interpretation of Luxor and its great annual festival (the Feast of Opet). They have concluded that Luxor is the temple dedicated to the divine Egyptian ruler or, more precisely, to the cult of the Royal Ka.

Examples of the cult, of the Royal Ka can be seen with the colossal seated figures of the deified Ramesses II before the Pylon and at the entrance to the Colonnade are clearly Ka-statues, cult statues of the king as embodiment of the royal Ka.

Shrine stations

Six barque shrines, serving as way stations for the barques of the gods during festival processions, were set up on the avenue between the Karnak and Luxor Temple. The avenue which went in a straight line between the Luxor Temple and the Karnak area was recently lined with human-headed sphinxes of Nekhtanebo I,21, in ancient times it is probable that these replaced earlier sphinxes which may have had different heads.Along the avenue the stations were set up for ceremonies such as the Feast of Opet which held significance to temple.

Each station had a purpose, for example the fourth station was the station of Kamare, which cooled the oar of Amun. The Fifth station of Kamare was the station which received the beauty of Amun. Lastly the Sixth Station of Kamare was a shrine for Amun, Holy of Steps.

 Luxor, Arabic Al-Uqṣur, also called El-Aksur, city and principal component of Al-Uqṣur urban muḥāfaẓah (governorate), Upper Egypt. Luxor has given its name to the southern half of the ruins of the ancient Egyptian city of Thebes. Area governorate, 21 square miles (55 square km). Pop. (2006) governorate, 451,318.

Luxor was the ancient city of Thebes, the great capital of (Upper) Egypt during the New Kingdom, and the glorious city of Amun, later to become the god Amun-Ra. The city was regarded in the Ancient Egyptian texts as w3s.t (approximate pronunciation: "Waset"), which meant "city of the sceptre" and also as t3 ip3t (conventionally pronounced as "ta ipet" and meaning "the shrine") and then, in a later period, the Greeks called it Thebai and the Romans after them Thebae.

Thebes was also known as "the city of the 100 gates", sometimes being called "southern Heliopolis" ('Iunu-shemaa' in Ancient Egyptian), to distinguish it from the city of Iunu or Heliopolis, the main place of worship for the god Ra in the north.

It was also often referred to as niw.t, which simply means "city", and was one of only three cities in Egypt for which this noun was used (the other two were Memphis and Heliopolis); it was also called niw.t rst, "southern city", as the southernmost of them.

The importance of the city started as early as the 11th Dynasty, when the town grew into a thriving city. Montuhotep II who united Egypt after the troubles of the first intermediate period brought stability to the lands as the city grew in stature.

The Pharaohs of the New Kingdom in their expeditions to Kush, in today's northern Sudan, and to the lands of Canaan, Phoenicia and Syria saw the city accumulate great wealth and rose to prominence, even on a world scale. Thebes played a major role in expelling the invading forces of the Hyksos from Upper Egypt, and from the time of the 18th Dynasty to the 20th Dynasty, the city had risen as the political, religious and military capital of Ancient Egypt.

The city attracted peoples such as the Babylonians, the Mitanni, the Hittites of Anatolia (modern-day Turkey), the Canaanites of Ugarit, the Phoenicians of Byblos and Tyre, the Minoans from the island of Crete. A Hittite prince from Anatolia even came to marry with the widow of Tutankhamun, Ankhesenamun. The political and military importance of the city, however, faded during the Late Period, with Thebes being replaced as political capital by several cities in Northern Egypt, such as Bubastis, Sais and finally Alexandria.

However, as the city of the god Amun-Ra, Thebes remained the religious capital of Egypt until the Greek period.The main god of the city was Amun, who was worshipped together with his wife, the Goddess Mut, and their son Khonsu, the God of the moon.

With the rise of Thebes as the foremost city of Egypt, the local god Amon rose in importance as well and became linked to the sun god Ra, thus creating the new 'king of gods' Amon-Ra. His great temple, at Karnak just north of Thebes, was the most important temple of Egypt right until the end of antiquity.
 
Later, the city was attacked by Assyrian emperor Assurbanipal who installed the Libyan prince on the throne, Psamtik I. The city of Thebes was in ruins and fell in significance. However, Alexander the Great did arrive at the temple of Amun, where the statue of the god was transferred from Karnak during the Opet Festival, the great religious feast.

Thebes remained a site of spirituality up to the Christian era, and attracted numerous Christian monks in the Roman Empire who established monasteries amidst several ancient monuments including the temple of Hatshepsut, now called Deir el-Bahri ("the northern monastery")




























Link
https://www.youtube.com/watch?v=7_GWoT0jtQw
https://en.wikipedia.org/wiki/Luxor_Temple
http://ancientegyptonline.co.uk/luxortemple2.html

Tuesday, June 12, 2018

Egypt, The Giza Pyramid Research; Water Pump Technology and Remote Viewing of the Great Pyramid How was built what was the Functionality?

 The Great Pyramid a true masterpiece and has rightly earned the title of a “Wonder”. It was built with such precision that our current technology cannot replicate it.  Historical analysis shows that the Pyramids were built between 2589 and 2504 BC. There are so many interesting facts about this Pyramid that it baffles archaeologists, scientists, astronomers, and tourists alike.

The stone largest building in the world having been constructed of an estimated 2,300,000 to 2,500,000 slabs of yellow limestone the core, white limestone for the smooth facing and casting and granite for interior chambers and galleries and for roofing.

Its total mass estimated at 93 million cubic feet weighing 7 million tons has been calculated to exceed that of all cathedrals churches and chapels combined that have been built in England since the beginning of Christianity.

On ground that has been artificially levelled the great pyramid rises on a thin platform whose four corners are marked by sockets of no ascertain function.

In spite of the passage of millennia, continental shifts, earth wobble around its own axis, earthquakes and its immense weight of pyramid itself, the relative thin platform less than 22 inches thick is still undamaged and perfectly level; the error or shift in its perfect horizontal alignment is less than a tenth of an inch over 758 feet that each side of the artform measures.

From the distance the Great Pyramid and it's two companions appear to be true pyramids, but when approached in ie realized that they are a kind of step pyramids built in layers upon layers of stone each layer smaller than the one below.

The great pyramid is a step pyramid and its core built to sustain great vertical stress.

The casting stones with which the sides were covered were removed and used in nearby Cairo buildings but few can still be seen near the top of the second pyramid and some can be seen at the base of the first pyramid

It is these casing stone which determines the angle of the pyramid's sides.

The cap of the pyramid is missing. It is said that it might have been made of metal or covered with a shiny metal as the shiny pyramid shapes of the obelisk were.

Who when and why they were removed from their great heights.

The pyramid is estimated to have around 2,300,000 stone blocks that weigh from 2 to 30 tons each and there are even some blocks that weigh over 50 tons.

The Pyramid of Menkaure, the Pyramid of Khafre and the Great Pyramid of Khufu are precisely aligned with the Constellation of Orion.
The base of the pyramid covers 55,000 m2 (592,000 ft 2) with each side greater than 20,000 m2 (218,000 ft2) in area.

The interior temperature is constant and equals the average temperature of the earth, 20 Degrees Celsius (68 Degrees Fahrenheit).

The outer mantle was composed of 144,000 casing stones, all of them highly polished and flat to an accuracy of 1/100th of an inch, about 100 inches thick and weighing approx. 15 tons each.

The cornerstone foundations of the pyramid have ball and socket construction capable of dealing with heat expansion and earthquakes.


The mortar used is of an unknown origin . It has been analyzed, and its chemical composition is known, but it can’t be reproduced. It is stronger than the stone and still holding up today.

It was originally covered with casing stones (made of highly polished limestone). These casing stones reflected the sun’s light and made the pyramid shine like a jewel.
They are no longer present being used by Arabs to build mosques after an earthquake in the 14th century loosened many of them. It has been calculated that the original pyramid with its casing stones would act like gigantic mirrors and reflect light so powerful that it would be visible from the moon as a shining star on earth.

Appropriately, the ancient Egyptians called the Great Pyramid “Ikhet“, meaning the “Glorious Light“.  How these blocks were transported and assembled into the pyramid is still a mystery.

Aligned True North: The Great Pyramid is the most accurately aligned structure in existence and faces true north with only 3/60th of a degree of error. The position of the North Pole moves over time and the pyramid was exactly aligned at one time.

Center of Land Mass: The Great Pyramid is located at the center of the land mass of the earth. The east/west parallel that crosses the most land and the north/south meridian that crosses the most land intersect in two places on the earth, one in the ocean and the other at the Great Pyramid.

The four faces of the pyramid are slightly concave, the only pyramid to have been built this way.
The centers of the four sides are indented with an extraordinary degree of precision forming the only 8 sided pyramid; this effect is not visible from the ground or from a distance but only from the air, and then only under the proper lighting conditions. This phenomenon is only detectable from the air at dawn and sunset on the spring and autumn equinoxes when the sun casts shadows on the pyramid.

The granite coffer in the “King’s Chamber” is too big to fit through the passages and so it must have been put in place during construction.

The coffer was made out of a block of solid granite. This would have required bronze saws 8-9 ft. long set of teeth of sapphires. Hollowing out of the interior would require tubular drills of the same material applied with a tremendous vertical force.

Microscopic analysis of the coffer reveals that it was made with a fixed point drill that used hard jewel bits and a drilling force of 2 tons.

The Great Pyramid had a swivel door entrance at one time. Swivel doors were found in only two other pyramids: Khufu’s father and grandfather, Sneferu and Huni, respectively.

It is reported that when the pyramid was first broken into that the swivel door, weighing some 20 tons, was so well balanced that it could be opened by pushing out from the inside with only minimal force, but when closed, was so perfect a fit that it could scarcely be detected and there was not enough crack or crevice around the edges to gain a grasp from the outside.

With the mantle in place, the Great Pyramid could be seen from the mountains of Israel and probably the moon as well.

The weight of the pyramid is estimated at 5,955,000 tons. Multiplied by 10^8 gives a reasonable estimate of the Earth’s mass.

The Descending Passage pointed to the pole star Alpha Draconis, circa 2170-2144 BCE. This was the North Star at that point in time. No other star has aligned with the passage since then.

The southern shaft in the King’s Chamber pointed to the star Al Nitak (Zeta Orionis) in the constellation Orion, circa 2450 BCE The Orion constellation was associated with the Egyptian god Osiris. No other star aligned with this shaft during that time in history.

Sun’s Radius: Twice the perimeter of the bottom of the granite coffer times 10^8 is the sun’s mean radius. [270.45378502 Pyramid Inches* 10^8 = 427,316 miles]

The curvature designed into the faces of the pyramid exactly matches the radius of the earth.

Khufu’s pyramid, known as the great pyramid of Giza, is the oldest and largest, rising at 481 feet (146 meters). Archeologists say it was the tallest structure in the world for about 3, 800 years.

The relationship between Pi (p) and Phi (F) is expressed in the fundamental proportions of the Great Pyramid.

 From other sources we find that:

Egyptology has been polarized into two primary factions. The Orthodox camp follows the standard version of history that claims the Great Pyramid was utilized as a tomb by Khufu5. Yet, no one has ever found any signs of a non-intrusive burial within any pyramid2,3,5. The only sign that the Great Pyramid was even related to Khufu is a glyph in an upper chamber that was most likely forged by Perring3. They view the entire subterranean section as a mistake and believe the 1,500 square foot subterranean chamber was unfinished and left abandoned5.

The oral indigenous teachings state:



The pyramids were never intended as tombs.
The pyramids are some type of sonic machines.
The pyramids were in existence long before the time of the Pharaohs.
Dynastic Egyptians merely lived in the presence of the pyramids just as we do today.



Did these buildings actually come from an earlier time of a more advanced civilization?
Even Dr. Robert Schoch's geological evidence points to a much earlier age for the pyramid builders - at least 5,000 years before the Orthodox dating.  He shows extreme rain weathering of the Sphinx enclosure that shows that it was built at a much wetter period of Egyptian history which was at the end of the ice-age.  The dynastic Egyptians don't even claim to have built the Sphinx but merely repaired it - just as we do toda
The use of the Great Pyramid's subterranean layout produces the best and most advanced hydraulic ram pump ever built. Is this mere coincidence that these parts can be used in some type of simple, yet sophisticated, machine? What physical evidence supports this claim? We do find extensive water erosion patterns that exactly match the water flows of the machine


The Nile River was a major factor for the Giza plateau design. Just as important as the Nile was the Western Nile (Ur Nile). The Western Nile was at a higher elevation and gravity fed many miles of underground aqueduct. One function of the aqueducts was to provide water to the Great Pyramid’s moat


According to John Cadman (http://sentinelkennels.com/Research_Article_V41.html) there was a water machine under the Great Pyramid and the water machine produced the sonic force to resonate the King's chamber.


THE HYDRAULIC RAM PUMP
Before any theorizing about the Great Pyramid, a little pump background is helpful. Invented in the 1700’s, hydraulic ram pumps are a primitive but highly effective machine. These simple pumps incorporate only two moving parts. 

Used extensively around the world until the invention of the electric water pump, these pumps have nearly been forgotten. The basic design utilizes the force of falling water to elevate part of the water. Water flows down the drive pipe into the compression chamber. 







Water escapes from the waste valve until the water‘s velocity forces the valve shut. When the valve shuts, the water stops flowing instantaneously and causes the water to compress resulting in a compression wave, or shock wave, to emanate from the valve area. In the driveline, the water reverses direction until the shock wave reaches air and returns down the pipe. 

In the output line, a high pressure surge passes through the check valve. This surge is at least fifty times (3,360 psi at Giza) the static water pressure of the compression chamber. When the compression wave leaves the compression chamber, a low pressure situation exists. The low pressure is equal and opposite to the compression wave. 


This immediately re-opens the waste valve. The stand pipe is a shortcut for the compression wave to reach air. Once the compression wave reaches air, a wave returns down the stand pipe and starts the water flow back into the compression chamber. The stand pipe, usually twice the diameter of the drive pipe, allows for the highest possible cycling rate.


Most hydraulic ram pumps are free standing, with the majority of parts being exposed above ground . A specialized application is to have the lines underground. 

The stand pipe needs to exit to air, and the waste valve (wastegate) also needs an exit. To facilitate the waste valve output, a line may be extended from the compression chamber to an appropriate location. This allows for the bulk of the pump lines to be centrally located. This layout has an interesting side effect - the compression wave becomes focused in the line leading to the compression chamber and this focused compression wave transmits a pulse through the compression chamber’s ceiling.

 .


The basic hydraulic ram pump has water running from the elevated water source to the compression chamber. A valve in the compression chamber allows water to flow  out until the velocity forces the valve shut. The valve shutting causes a high pressure spike that forces water past the check valve and through the output line. The waste valve reopens and once again allows water to flow  down the pipe. The stand pipe affects the cycle rate by creating a shortcut for the reverse surge.

 Building an underground ram pump requires lengthening of the compression chamber to allow for waste water output.
 
Before theorizing about missing parts, it is important to view what is known to have existed. Although the retaining wall (1) no longer is in existence, it is an accepted part of the complex. The retaining walls and casing stones were dismantled for building materials for Cairo.


THE “DEAD END” SHAFT: CHANGE THE PRESSURE TO CHANGE THE FREQUENCY
There needs to be a simple means to compensate for variance in water temperature and atmospheric pressure since these factors change the velocity of the compression wave. The “dead end” shaft pumps water, but mainly allowed for fine-tuning the compression wave timing and frequency. 

Adjusting backpressure by adjusting a gate valve at the end of the shaft allows for changes in timing. Testing has shown that the pulse rate can be varied by at least 30 percent. Adjusting the backpressure {67psi to 3360psi at Giza} also changes the water’s density thereby changing the compression wave’s velocity and frequency. This easily allows for fine-tuning of the lower assembly to create a standing wave in the subterranean chamber and wastegate line.


THE WASTEGATE LINE: TUNNEL FROM SUB CHAMBER PIT TO SPHINX AREA



Indigenous teachings speak of a tunnel from the area of the Sphinx leading to the Great Pyramid. This four foot square tunnel leads from the bottom of the pit to the area just east of the Sphinx. This tunnel did not pass under the Sphinx but exited about 100' in front of the Sphinx temple. It dumped into the ancient Nile River.

Edward Kunkel was also taught the indigenous teachings that a tunnel existed from the Sphinx area that led to the Great pyramid


 Piston striking valve seat stops water flow  instantaneously and causes compression of the water. The compression of the water causes high pressure compression wave and low  pressure rarefaction wave. The low  pressure rarefaction wave reopens the valve. (Right) The submerged horizontal wastegate in action. It runs  better once the valve is submerged.



 
INITIAL OBSERVATIONS

No amount of theorizing can replace the solid answers presented by a working model. The running model confirms that the output was through the “dead end” shaft. Also confirmed is the existence of a tunnel out through the bottom of the subterranean chamber’s pit that lead down to the Nile River. The running model is capable of elevating water to any part of a would be pyramid model and can be run without the pyramid structure. If the entire pyramid can be removed and the pump still functions then why put forth the tremendous effort of pyramid construction? This points to the idea that the subterranean assembly is a part of a larger machine.


 
FORCES AND MODELS

The subterranean chamber utilized two distinctly different forces:













 

SUMMARY


The walled enclosure around the Great Pyramid was a moat.
The water supply for the moat provided more water than the Great Pyramid consumed.
The causeway removed the excess water.
The subterranean chamber is not an air compression chamber. (Kunkel)1
The water-saturated subterranean chamber transmits shock waves to the ceiling.
There was an air/gas removal line in the northwest area of the subterranean chamber.
The air/gas removal line is connected to the niche in the Queen's chamber.
The air/gas removal line also perked water into Queen's chamber.
The well shaft functions as water return line from the Queen's chamber.
The well shaft minimizes the reverse pulse in the descending passage.
The grotto functioned as an expansion chamber to limit reverse pulse.
The subterranean chamber's antechamber functioned as an acoustic filter.
There is water output through the “dead end” shaft.
The water output may have been connected to with the "water shaft".
There is a check valve at the end of the ”dead end” shaft.
A gate valve was the fine-tuning mechanism for the standing wave in the wastegate line.
The pit is connected via tunnel to a wastegate in front of the "Sphinx Temple" (Nile River).















Here is another research on the Giza Pyramid that belong to Farsight Institute

The Great Pyramid of Giza, sometimes called the Pyramid of Khufu, or the Cheops Pyramid, is truly one of the most amazing mysteries on Earth. This is the definitive breakthrough study of how it was built. It is huge, and it was built with gigantic stone blocks that seem nearly impossible to cut, transport, and assemble even today on such a massive scale as must have occurred long ago when this pyramid was originally constructed. Until now, no one on Earth really knew how these big structures were assembled, at a time when tools were rudimentary, camels and wooden or reed boats were the primary forms of transportation, and manual labor was the only means available to construct anything. 
 
This is a breakthrough scientific study that combines the use of remote viewing on an unprecedented scale to solve the mystery of the Great Pyramid of Giza. Remote viewing is a mental procedure that was originally developed by the United States military and used for espionage purposes. 

Now, civilians employ the same methods, or procedures that are derivative of those methodologies, to study human history. In a project completed at The Farsight Institute using remote-viewing data collected by two of the most accomplished "military grade" remote viewers of the day, the true story of how the Great Pyramid of Giza was actually constructed using a combination of exotic advanced technology and brutal manual labor can finally be told.

Very little of what most people learned in school about the origins of the Great Pyramid of Giza is correct. Our civilization needs to uncover its true history without bias and with an open mind. Now is not the time to censor new knowledge. Now is the time to face our past.























































 How did they do it?




Reference:

The Great Pyramid: A Miracle in Stone, 1973, Joseph A. Seiss
Secrets of the Great Pyramid, 1978, Peter Tompkins
Back in Time 3104 B.C. to the Great Pyramid, 1990, S. G. Taseos
The Authorship and Message of the Great Pyramid, 1953, Julian T. Gray, E. Steinmann & Co.
Our Inheritance in the Great Pyramid, 1891, C. Piazzi Smyth
http://www.timstouse.com
http://www.gizapyramid.com/general.htm
http://sentinelkennels.com/Research_Article_V41.html
http://farsight.org/FarsightPress/Great_Giza_Pyramid.html